Accessories and Replacement Parts
When fitted with another item of personal protective equipment or with an accessory (other than as supplied by the helmet manufacturer for use with this helmet) a helmet marked as complying with
EN443 might no longer satisfy all clauses of the standard.
All accessories and replacement parts are designed for the use with your Bullard Magma helmet.
Do not use them separately or with other brand or model helmets. Do not use any accessories or replacements parts other than listed below.
R965
R966
R967
R968
R969
R970
R973
Plate Kit
Connector Kit
Logo Kit
Chinstrap Kit
Crown strap kit
Mask Adapterkit
Screw kit
Assembly and cover
plate R/L with screws
Sleeve and washer R/L
with screws
Bullard Logo with O-ring
and screw
Chin strap with screws
Crown straps and
connector strap with
hangers
Mask Adapter R/L with
screws
Complete set of screws
List of accessories and replacement parts
R950 Visor
R957 Napeband
R958 Browband
R959
Brow Pad
R160
Ratchet Cover
R951
Eye Protector
R960
Neck Protector
R961
Dutch Neck Protector
R952
Visor Gold Plated
R992
Hanger Loop Han´n Go
R995
Chin Cup Strap
R996
Nomex Hood
Accessories and replacement parts are subject to technical changes and completion. Please
check www.bullardextrem.com for latest information
Colors
Lumenescent Yellow, Yellow 1018, Fluorescent Yellow 1026, Fluorescent Red 2005, Red 3020,
Green PMS 362, Blue 5015, White 9016, Black 9004, Silver 9006.
Certification
Your helmet has been tested and certified according to EN443:2008, visors according to
EN14458:2004, goggles according to EN166 .
The helmet is suitable for structural fire fighting and Hot Training.
Hot Trainings can damage the helmet which is not covered by the regular warranty. It is
recommended to provide separate helmets dedicated to Hot Training and use Nomex hoods.
EC Declaration of Conformity
This product conforms to the provision of the latest EU Directives for PPE (EU2016/425) and
Marine Equipment (MED2014/90/EU) to be found at http://eur-lex.europa.eu
as well as to EN443:2008 and EN14458:2004 to be found at www.beut.de
The full Declaration of Conformity can be found here:
http://www.bullard.com/europe/de/downloads/#FireHelmet
Options and Marking
Option
Marking
Electrical properties classification
- wet helmet insulation test according to 6.8.2
- surface insulation test according to 6.8.2
E2
E3
Classification Low temperature: -40°C
****
C: Classification liquid chemicals
NaOH, HCe, H
2
SO
4
, O-Xylen
WARNING
The Helmet absorbs the energy of a blow by partial destruction of, or damage to, the helmet. Even though such damage may not be readily apparent, any helmet subjected to a
severe impact should be replaced. The protection provided by a helmet depends on the circumstances of an accident, and wearing a helmet cannot always prevent serious or
even fatal injuries or long-term invalidity. The safety intended to be provided by the helmet can only be ensured when it is properly assembled and correctly fitted. Removable
parts shall not be worn separately.
Always wear a correctly-adjusted helmet and straps, and always bear in mind that a helmet cannot protect the neck area or other unprotected areas of the head.
Ensure that wearing respiratory equipment does not affect the fit of the helmet and vice versa.
This helmet is only approved for use in fire service, rescue service and disaster control operations.
It is especially unsuitable as a sports or motorcycle helmet.
©2017 Bullard. All rights reserved.
6029009296G (0917)
ISO 9001
certified
0299
CE Eingeschaltete notifizierte Stelle
DGUV Test, FA PSA Prüf-
und Zertifizierungsstelle,
Zwengenbergerstr. 68, 42781 Haan,
Id.Nr. 0299
Americas:
Bullard
Owner of certificate and distribution
Bescheinigungsinhaber und Vertrieb
1898 Safety Way
Cynthiana, KY 41031-9303
Toll free: 877-BULLARD (285-5273)
Tel: 859-234-6616
Fax: 859-234-8987
Europe:
Bullard GmbH
Bevollmächtigte Vertretung und
Vertrieb
Authorized Representative and
Distribution
Lilienthalstrasse 12
53424 Remagen • Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829
Asia-Pacific:
Bullard Asia Pacific Pte. Ltd.
Authorized Representative and
Distribution
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5176
DNV GL SE
Brooktorkai 18
20457 Hamburg
Germany
Eingeschaltete notifizierte Stelle
Notified Body
w w w . b u l l a r d . c o m
