©2019 Bullard. All rights reserved.
Sure-Lock is a registered trademark of Bullard.
60290010853D (0917)
Option
Marking
Electrical properties classification
• wet helmet insulation test according 4.12.2
• surface insulation test according 4.12.3
E2
E3
Classification Low temperature: -40°C
****
C: Classification liquid chemicals
NaOH, HCe, H
2
SO
4
, O-Xylen
Options and Marking
Accessories and replacement parts
The use of components other than mentioned below along with the helmet might cease
the CE approval of your helmet according EN443:2008.
All accessories and replacement parts are designed for the use along with your helmet.
These must not be used along with other helmets or as self contained equipment.
R1021
Head ring with ratchet H1500
R163
Chin strap H1500
R1022
Ratchet cover H1500
R1023
Brow pad H1500
VBLKN
Visor carrier H1500
R1025
Adapter for visor carrier (pair)
R1003
Visor 10cm Type A H1500
R1005
Visor 15cm, Type B H1500
VMESH
Mesh visor H1500
R315
Visor 10cm, Type A
R330
Visor 10cm
R325
Visor 15cm
R153
Adapter visor
R728
Neck protector Nomex
R732
Dutch ear Neck Protector H1500
STRH15
Reflective stripe H1500
Accessories and replacement parts are subject to technical changes and completion.
Please check www.bullardextrem.com for latest information
Colors
H1500 lumenescent yellow, other colors on demand
Certification
Your helmet has been tested and certified according EN443:2008,
visors according EN14458:2018, the goggles XTO according EN166.
The helmet is suitable for structural fire fighting and Hot Training.
Hot Trainings can damage the helmet which is not covered by the regular warranty. It
is recommended to provide separate helmets dedicated to Hot Training. Or use Nomex
Hoods
EC Declaration of Conformity
This product conforms to the provision of the latest EU Directives for PPE (EU2016/425)
and Marine Equipment (MED2014/90/EU) to be found at http://eur-lex.europa.eu
as well as to EN443:2008 and EN14458:2018 to be found at www.beut.de
The full Declaration of Conformity can be found here:
http://www.bullard.com/europe/de/downloads/#FireHelmet
WARNING
The protection provided by a helmet depends on the circumstances of an accident, and wearing a helmet cannot always prevent serious or even fatal injuries
or long-term invalidity.
Always wear a correctly-adjusted helmet and straps, and always bear in mind that a helmet cannot protect the neck area or other unprotected areas of the
head.
Ensure that wearing respiratory equipment does not affect the fit of the helmet and vice versa.
This helmet is only approved for use in fire service, rescue service and disaster control operations.
It is especially unsuitable as a sports or motorcycle helmet.
ISO 9001
certified
0299
CE Eingeschaltete notifizierte
Stelle
DGUV Test, FA PSA Prüf-
und Zertifizierungsstelle,
Zwengenbergerstr. 68, 42781
Haan, Id.Nr. 0299
DNV GL SE
Brooktorkai 18
20457 Hamburg
Germany
Eingeschaltete notifizierte Stelle
Notified Body
www.bullard.com
Bullard Center
2421 Fortune Drive
Lexington, KY 40509 • USA
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-246-0243
Americas Operations
1898 Safety Way
Cynthiana, KY 41031 • USA
877-BULLARD (285-5273)
Tel: +1-859-234-6616
Fax: +1-859-234-8987
Owner of certificate and distribution
Bullard GmbH
Dieselstrasse 8a
53424 Remagen • Germany
Tel: +49-2642 999980
Fax: +49-2642 9999829
Authorized Representative and
Distribution
Bullard Asia-Pacific Pte. Ltd.
LHK Building
701, Sims Drive, #04-03
Singapore 387383
Tel: +65-6745-0556
Fax: +65-6745-5176
