www.bullard.com
7
ADP3CA Free-Air® Pump
User Manual
W
arr
anty / Replacement
schedule
ResPiRatoR aiR teMPeRatuRe too high (aboVe aMbient)
- Air supply hoses coiled too tightly. Uncoil at least the first 50 feet of hose.
- Place portion of air supply hose in large container of ice (e.g. 30 gallon trash can).
- keep air supply hoses out of direct sunlight or other heat sources.
Replacement Parts
Cat. No.
Part No.
Description
oPtional PuMP accessoRies
4720-01-307-6072
v50IN
Remote INLET air hose kit (50 feet) with
remote inlet filter and pump fittings
v50Ex
Extension hose kit (50 foot sections) for above
S17931
LOCTITE SAFETY SOLvENT (pump or motor)
note:
If breathable air cannot be assured at all times at the pump, remove
inlet filter and attach necessary v50 hose kits to air inlet port. Use up to 300
feet (six lengths) always ending with v50IN kit. These hose kits can provide
access to a remote “clean air” location.
RePlaceMent PuMP PaRts
6685-01-276-0692
S16222
Gauge, Air (0-35 psig)
4310-01-255-7780
S17101
Bullard CARBOFINE outlet filter cartridge
23611
Inlet filter
244852
Outlet filter jar (aluminum jar only)
263552
Outlet filter assembly o-ring (10 per pkg.)
21052
Conversion kit
v15
Coupler, 1/4” Industrial Interchange, with
male 3/8” NPT
4240-01-213-3061
v18
Coupler, 1/4” Schrader with female pipe
thread FPT
v19
Coupler, 1/4” Snap-Tite with 1/4” female
pipe thread FPT
v23
Quick-disconnect coupling adaptor, single
3/8” female NPT
S16191
Coupler, 1/2” Industrial Interchange, with
3/8” male NPT
S15922
Pump repair kit (includes four carbon
vanes, one 23611 inlet filter, one S17101
outlet filter cartridge and instructions
aiR MotoR RePlaceMent PaRts
S09853
Gauge (0-230 psig)
17761
Motor repair kit (includes four carbon
vanes, two motor bearings, vane springs,
seal and instructions)
note:
Pump and motor repair requires use of a 3-prong wheel puller, a gear
puller and an experienced mechanic. It may be quicker and less expensive to
ship pump and/or motor to Bullard for repairs. See Authorization for Returned
Goods, page 8)
Pump Warranty
free-air Pump one Year limited Warranty
The Bullard warrants to the original purchaser that the Free-Air Pump will be free
of defects in material and workmanship under normal use and service for a period
of one (1) year from the date of purchase. Bullard’s obligation under this warranty
is limited to repairing or replacing, at its option, articles that are returned within the
warranty period and that are, after examination, shown to Bullard’s satisfaction to
be defective, subject to the following limitations.
a) Free-Air Pump must be returned to the Bullard factory with shipping
charges prepaid.
b) Free-Air Pump must not have been misused, subjected to negligent use, or
damaged in transport.
c) The date of purchase is the start of the one year warranty period. (A copy of
the purchaser’s original invoice showing the date of purchase is required to
validate warranty coverage.)
In no event shall Bullard be responsible for damages for loss of use or other
indirect, incidental, consequential or special costs, expenses or damages incurred
by the purchaser, notwithstanding that Bullard has been advised of the possibility
of such damages.
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
ONE (1) YEAR FROM THE DATE OF PURCHASE OF THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may have other rights which vary from state to state.
TO RETURN GOODS: Written permission must be obtained before returning any
material for any reason whatsoever (See Authorization for Returned Goods on
page 8).
Products which are obsolete or made to special order may not be returned.
Warranty information can be obtained from:
BULLARD
1898 SAFETY WAY
CYNTHIANA, kY 41031-9303
TOLL-FREE: 877-BULLARD (285-5273)
PHONE: 859-234-6616
FAx: 859-234-8987
air filter Replacement schedule
Regular inspection and replacement of the air filters will prevent extensive and
costly pump repairs. Dirty or clogged filters can be responsible for failure of the
pump to build up outlet pressure and eventual overheating.
- Replace the Carbofine Outlet Filter Cartridge (Cat. No. S17101) at least once
every 200 running hours or sooner if necessary.
The Outlet Filter Cartridge is multi-layered with 40-micron size particles of
activated carbon, a sorbent bed with an exposed carbon surface of more than
15,000 square feet.
•
vapor Removal Efficiency: 90-95%
•
D.O.P. Efficiency: (0.3 to 0.6 Micron Particles) 99.97%
•
Solid Particle Filtering: 0.2 Micron and Larger.
•
Liquid Particle Filtering: 0.75 Micron and Larger
- Replace the medium efficiency Inlet Filter (Cat. No. 23611) at least once every
500 running hours or sooner if necessary.
The Inlet Filter keeps moisture as well as particulates larger than 25 microns
out of the air supply and helps protect the pump’s carbon vanes.
We recommend the chart on the back page be used to monitor and maintain a
routine air filter replacement schedule.
