Bull NovaScale R422-E1 Installation And User Manual Download Page 83

Page: 83 / 138

Chapter 7: BIOS

7-19

IPMI (The option is available only when an IPMI card is installed

in the system.)

IPMI Specifi cation Version:

This item displays the current IPMI Version.

Firmware Version:

This item displays the current Firmware Version.

System Event Logging

Select Enabled to enable IPMI Event Logging. When this function is set to Disabled,

the system will continue to log events received via system interface. The options

are

Enabled

and Disabled.

Clear System Event Logging

Enabling this function to force the BIOS to clear the system event logs during the

next cold boot. The options are Enabled and

Disabled

Existing Event Log Number

This item displays the number of the existing event log.

Event Log Control

System Firmware Progress

Enabling this function to log POST progress. The options are Enabled and

Disabled

BIOS POST Errors

Enabling this function to log POST errors. The options are Enabled and

Disabled

BIOS POST Watch Dog

Set to Enabled to enable POST Watch Dog. The options are Enabled and

Disabled

Summary of Contents for NovaScale R422-E1











































































































































Search results

Summary of Contents for NovaScale R422-E1

Reviews:

Related manuals for NovaScale R422-E1

Brands by name

Popular brands

Bull NovaScale R422-E1, Installation And User Manual

Search results

Summary of Contents for NovaScale R422-E1

Reviews:

Related manuals for NovaScale R422-E1

Brands by name

Popular brands