Bull NovaScale R422-E1 Installation And User Manual Download Page 108

Page: 108 / 138

C-8

ovaS

ale R422-E1/R422-INF-E1 Installation and User's Guide

Deleting a RAID Volume

Warning:

Make sure you back up your data before deleting a RAID set.

You will lose all data on the disk drives when deleting a RAID set.

a. From the main menu, select item2-Delete RAID Volume, and press <Enter>.

b. Use the <Up Arrow>, <Down Arrow> keys to select the RAID set you want to

delete and press <Del>. A warning message displays.

c. When asked "Are you sure you want to delete this volume (Y/N), press "Y" to

delete the RAID volume, or type "N" to go back to the Delete Volume menu.

i. When asked "Are you sure you want to create this volume (Y/N), press "Y" to

create the RAID volume, or type "N" to go back to the Create Volume menu.

Summary of Contents for NovaScale R422-E1











































































































































Search results

Summary of Contents for NovaScale R422-E1

Reviews:

Related manuals for NovaScale R422-E1

Brands by name

Popular brands

Bull NovaScale R422-E1, Installation And User Manual

Search results

Summary of Contents for NovaScale R422-E1

Reviews:

Related manuals for NovaScale R422-E1

Brands by name

Popular brands