Bull NovaScale Blade BL265, Installation And User Manual

Page: 59 / 92

Chapter 3. Installing Options
43
3.10.6 Removing a storage interface card
Use this information to remove a storage interface card from the blade server.
The storage interface card controls the SAS hot-swap storage drives. The following
illustrations and installation instructions shows how to remove a ServeRAID-MR10ie CIOv
storage interface card from the blade server. The illustrations and removal instructions are
similar for other CIOv storage interface cards.
Figure 3-20. Removing a storage interface card
To remove a storage interface card, complete the following steps:
1. Read the safety information that begins on page vii and Installation guidelines on
page 17.
2. If the blade server is installed in a Blade Chassis, remove it (see Removing the blade
server from the Blade Chassis on page 19 for instructions).
3. Open the blade server cover (see Removing the blade server cover on page 20).
4. If an optional expansion unit is installed, remove the expansion unit (see Removing an
optional expansion unit on page 23). The storage interface card option includes the
storage interface card, backup battery, and backup-battery cable. These parts can be
removed separately from each other.