12
Product Name - Manual Type
16. Install the DSIB.
1. Align the board with the rear of the server drawer. The locking flap(
A
) on the rear panel
of the server drawer enters the dedicated opening in the DSIB board(
B)
.
Figure 16. Aligning the DSIB board
2. Allow the board to swivel, taking care that the three tenons(
B
) on the DSIB stiffener enter
the three corresponding mortises on the rear(
A
) panel of the server drawer
.
Carefully
push the assembly to the rear of the server drawer if the connectors do not fit
immediately.
Figure 17. Securing the DSIB board
