Bull NovaScale 4020, User Manual, Page: 116 / 173

100 NovaScale 4020 User’s Guide
3. From the menu tab, use the arrow keys to navigate to the Utility menu and press
<Enter>
or the use the
<down arrow>
to expand the menu.
4. From the Utility menu, arrow to
Install Service Partition
and press
<Enter>
to launch the Service Partition Administration menu.
5. Choose
3
and press
<Enter>
to install the service partition files.
6. The installation software reports whether a system partition has been found. If so, it is
recommended that you install the service partition files onto the existing system partition.
Do so by choosing
1
and pressing
<Enter>
.
7. Choose the number for the system partition on which to install the partition files and press
<Enter>
.
8. After receiving the message indicating that all files were installed successfully, press any
key.
9. Press
<ESC>
to exit the Service Partition Administration menu and return to the EFI CD
menu.
Booting from the Service Partition
The service partition contains utilities and diagnostics. To run these utilities or diagnostics, you
need to boot the server from the service partition. You can reboot a managed server from the
service partition either locally or remotely. When you reboot the server to the service partition
remotely, you can do the following:
•
Run EFI shell commands on the server
•
Run a program from the service partition
•
Run diagnostics specific to the server
•
Run the SMU to configure the server for Server Management
Locally
Follow these steps to locally boot the server to the service partition:
1. Restart the managed server.
2. Monitor the boot process and press
<F2>
when prompted to enter BIOS setup.
3. Arrow to the System Management menu, and select
Enabled
for the Service Boot option.
4. Press
<F10>
to save the setting and exit out of the BIOS setup. The system automatically
reboots to the Service Partition.