Bull Escala EPC400, Setting Up The System

Page: 34 / 57

2-10
Setting Up the System
Starting the System for the First Time
Checking the Software Status
First Startup of a Pre-Installed System
Checking the Software Status
The software for your system can be:
•
Pre-installed
•
Not-installed.
By default, the system software is pre-installed on your system, when you receive it. This
makes your first startup of the system easier and faster.
Make sure your system software is pre-installed, by checking that the Preload Report sheet
has been supplied with the system. This is a one sheet document which indicates where
you can find the preload report file on your system disk.
Note: Once the system is running, you can list the installed software with the command:
lslpp –l | pg
In case your system software is not-installed, refer to the AIX Installation Guide .