Bull Escala EPC1200 Connecting Manual Download Page 213

Page: 213 / 224

G-1

Glossary

This glossary contains abbreviations, key–words and phrases that can be found in this document.

ATF

Application-Transparent Failover.

CPU

Central Processing Unit.

DAS

Disk Array Subsystem.

EPC

Escala Power Cluster.

FC–AL

Fibre Channel Abritrated Loop.

FDDI

Fibre Distributed data Interface.

FRU

Field Replaceable Unit.Media

HACMP

Name od software managing High Availability on
Powercluster and HA solutions.

LSA Adapter

Intergrated Ethernet Card.

MCA

Micro Channel Architecture (Bus).

MDI

Media Dependent Interface.

Marketing Identifier.

MIA

Media Interface Adapter.

PCI

Peripheral Component Interconnect (Bus).

PDB

Power Distribution Board.

PDU

Power Distribution Unit.

RSF

Remote Services Facilities.

SCSI

Small Computer System Interface.

SSA

Serial Storage Architecture.

URL

Uniform Resource Locator.

Summary of Contents for Escala EPC1200

































































































































































































































Search results

Summary of Contents for Escala EPC1200

Reviews:

Bull Escala EPC1200, Connecting Manual, Page: 213 / 224

Search results

Summary of Contents for Escala EPC1200

Reviews: