13
LP GAS TANK RETENTION GUIDELINES:
AN LP TANK (CYLINDER) WITHIN AN ENCLOSURE MUST USE A TANK RETENTION SYSTEM TO PREVENT BEING KNOCKED OVER.
Below are guidelines and illustrations for an LP Tank enclosure and how to install a Tank Retention System which can
be obtained through your Bull Dealer:
Any Tank Retention system must be secured to the floor using bolts and nuts or lock washers.
Once secured, place the LP tank in the tank retention system and tighten the tank retention bolt clockwise until the tank is held snug and
cannot move. Turn the retention bolt counter-clockwise to free the tank for removal.
Per CSA, it is required that any built-in cabinet must have enough room for only 1 LP tank.
The LP tank enclosure must not exceed (24.5” X 24.5” X 30”) and there must be a minimum clearance of 2 inches
between the floor and the propane tank enclosure.
WARNING:
DO NOT STORE AN EMPTY, SPARE OR DISCONNECTED LP GAS CYLINDER UNDER OR NEAR THIS GRILL OR ANY OTHER
APPLIANCE.
DO NOT USE A DENTED OR RUSTY LP GAS CYLINDER AS THIS MAY BE HAZARDOUS
DO NOT USE A LP GAS CYLINDER WITH A DAMAGED VALVE OR HOSE.