Bull Cedoc NovaScale Master 5.1, Installation And Administrator'S Manual, Page: 80 / 92

70
NovaScale Master 5.1 Server Add-ons - Installation and Administrator's Guide
NSMasterBVS
check_BVS
check_BullVideoServices uses the check_BVS shell (PERL) command:
Usage
check_BVS -H <host> -S {Streaming|Recording|Datagrams}
[{–p <period>} | { -l <begin> -t <end> }] [-w]
-H, --hostname <host> Hostname or IP address of target to check
-S, --service Streaming|Recording|Datagrams
-p, --period <period> | -l <begin> -t <end>
indicates to the Bull Video Server the period in seconds to calculate the
average values
-w, --web WEB HTML output format
Return code
”OK” (0), ”WARNING” (1), ”CRITICAL” (2), ”UNKNOWN” (3)
•
”OK”:
”Bull Video Server” runs normally.
•
”WARNING”:
”Bull Video Server” is in ”WARNING” state.
•
”CRITICAL”:
”Bull Video Server” is in ”CRITICAL” state.
•
”UNKNOWN”
All other type of processing errors (bad parameter, and so on
…
).
The BVS state ”UNREACHABLE” ( Bull Video Server is in ” UNREACHABLE ” state (daemon
not started, communication timeout,
…
)).will be transformed to Nagios “UNKNOWN”
status.
The status values (OK, WARNING, CRITICAL) are fixed by the video server itself according
to criteria’s indicated by a Bull Video Server administrator.
Output
The following information is displayed. Average values are calculated using the value
specified by the ‘polling interval’ textbox from the service configuration screen. The default
value is 1 min. A modification of this value will be automatically taken into account by the
check_BVS plugin.
‘Streaming’ service
Status global status of ‘Streaming’ service