Bull Cedoc NovaScale Master 5.1, Installation And Administrator'S Manual

Page: 66 / 92

56
NovaScale Master 5.1 Server Add-ons - Installation and Administrator's Guide
•
”WARNING”:
At least one ”logical drive” or one ”physical device” is in a ”WARNING” state.
•
”CRITICAL”:
At least one ”logical drive” or one ”physical device” is in a ”CRITICAL” state.
•
”UNKNOWN”
All other types of processing errors (bad parameter, no response, and so on
…
).
Note:
In the case of multiple errors, the global state will be the worst one; ”CRITICAL” >
”WARNING” > ”OK”.
Output
A string composed with a global state descriptor followed, if they exist, by error states of
concerned component (controller, Logical Device, Physical Device).
global state descriptor:
The first line shows the global state. The syntax is:
GAMTT RAID [CT |PD |LD ]<GlobalStatus>
”CT ”
if ”-A”
.
”PD ”
if ”-P”.
”LD ”
if ”-L”.
state descriptor by controller
They may be present after the global state descriptor if an error exists.
The syntax is:
[ CT(Ct<Ct>) <CtrlModel> <CtrlStatus>
[{LD(Ct<Ct> Nu<Ldn>) <LDType> <LDStatus>[, ] …}]
[{PD(Ct<Ct> Ch<Ch> Tg<Tg>) <PDType> <PDStatus>[, ] …}]
…]
<GlobalStatus> worst detected status
<CtrlModel> controller model
<CtrlStatus> worst state detected for an element of this controller (LD and PD)
<Ct> controller number
<Ldn> ”logical drive” number
<LDType> ”logical drive” type: ”RAIDx” or ”JBOD”
<LDStatus> ”logical drive” status
<Ct> controller number
<Ch> ”channel” number
<Tg> target number
<PDType> ”physical device” type: ”Disk”, ”Processor”, ”Ctrl Channel”, •
<PDStatus> ”physical device” status
Examples:
•
If global state is ”OK”:
> check_gamttraid -H <host>
GAMTT RAID OK
>