Manual Builder extreme 1000/1500/2000 pro
Extreme Builder Pro Manual Eng V2
16
These flags can be adjusted in height so the bed level position can be corrected if necessary.
Looking from the top position:
•
Turn clockwise and the nozzle moves away from the build plate
•
Turn counterclockwise and the nozzle moves closer to the build plate;
For every complete turn that is done there is a 0.5mm displacement of the nozzle according to the build
plate.
If there is an adjustment needed, don’t adjust more than 1/2 a turn at a time.
Adjust the flags on the side of the build plate where the bed level adjustment is needed
After adjusting the flags, always perform “autohome” Then the machine
is in his new adjusted position!
