Manual Builder extreme 1000/1500/2000 pro
Extreme Builder Pro Manual Eng V2
10
Bedlevel point 1,2 and 3 (if needed)
If the surface test does not come out right, it can mean two
things, the nozzle is too far or too close to the glass print
bed. That means you need to level the frame on point 1, 2
and 3. Gently turn the screws clockwise when the nozzle is
too close to the Glass and turn the screws anti clockwise
when the nozzle is too far from the glass. Do this on all 3
points, perform “auto home” and start the surface test
again. See online instruction video.
Print with BOTH extruders when not printing Dual colored
objects
For the best quality prints and to ensure the lifetime of the
Dual-Feed extruder, we advise you to print with both
extruder motors all the time. How? Start your print and as
soon as the print started go to control, change extruder
ratio and change them to 50%/50%. Now both motors will
be used. This also allow you to print 9 kg filament without
having to stop your print and changing filaments.
Remove print from glass plate
After the print has finished, open the doors of the Extreme
and let the build plate cool down to room temperature. This
makes it easier for you to remove the object from the glass
plate.
If you have any questions about the installation, please
contact your local reseller or
