Manual Builder extreme 1000/1500/2000 pro
Extreme Builder Pro Manual Eng V2
14
The surface test is ok, when the test looks like the pictures beneath and it sticks firmly to the build surface.
Missing lines in the surface test are an indication that the nozzle is too close to the build plate at the point.
The bed level needs adjustment. The nozzle needs to be adjusted more away from the build plate.
When the surface test doesn’t stick to the build plate, or comes loose during printing, the nozzle is too far
from the build plate. The bed level needs adjustment. The nozzle needs to be adjusted closer to the build
plate.
