8
A
UXILIARY
D
EVICE
S
ETUP
O
VERVIEW
:
If you have an auxiliary duct heater connected to the CERV, you will need to configure the setpoint for when the
auxiliary heater turns on. The following figure indicates how the auxiliary heater is used by the CERV.
R
ECOMMENDATIONS
:
The auxiliary heater setpoint is limited as to always be below the CERV’s heating setpoint. This means that the
auxiliary heater will only turn on if the CERV is actively trying to heat the air. It is recommended that you set this
setpoint a few degrees below the CERV’s heating setpoint.
