Buick Encore IntelliLink Infotainment System (GMNA-Localizing-U.S/Canada-
9234777) - 2016 - crc - 7/30/15
Bluetooth Phone/Devices
79
Conference Calling Using the
Infotainment Controls
Conference calling and three-way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work. This
feature is only supported when the
vehicle is not moving.
To start a conference while in a
current call:
1. Turn and press the outer ring of
the TUNE/MENU knob and
select Enter Number.
2. Enter the phone number and
then select OK.
3. After the call has been placed,
turn or press the outer ring on
the TUNE/MENU knob and
choose Merge Calls.
4. To add more callers to the
conference call, repeat Steps 1
−
4. The number of callers that
can be added is limited by your
wireless service carrier.
Ending a Call
Using the Infotainment Controls
Turn and press the outer ring on the
TUNE/MENU knob and select Hang
Up or select Hang Up on the
screen.
Using Steering Wheel Controls
Press
$
/
i
.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
Using the Infotainment Controls
Turn and press the outer ring of the
TUNE/MENU knob and select Mute
Call. Press again to cancel mute.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
Using the Infotainment Controls
1. Turn and press the outer ring of
the TUNE/MENU knob and
select Enter Number.
2. Enter the phone number or
select Enter Number on the
screen. Select digits, then
select OK.
Hands-Free Phone
Using Bluetooth Voice
Recognition
To use voice recognition, press the
b
/
g
button on the steering wheel.
Use the commands below for the
various voice features. For
additional information, say
“
Help
”
while in a voice recognition menu.
Making a Call
Calls can be made using the
following commands.
Dial or Call :
These commands can
be used interchangeably to dial a
phone number.
Digit Dial :
This command allows a
phone number to be dialed by
entering the digits one at a time.
