License Plate Lamp
To replace one of these bulbs:
1. Remove the screws for either of the license plate
lamps.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
Replacement Bulbs
Exterior Lamps
Bulb Number
Back-Up Lamps
921
Fog Lamp
H11
Front Turn Signal and
Parking Lamps
3157NAK
Headlamps
High-Beam Headlamp
H9
Low-Beam Headlamp
H11
Front/Rear Sidemarker, License
Plate Lamp, and Taillamp
194
Stoplamps and Taillamps
3057
For replacement bulbs not listed here, contact your
dealer/retailer.
5-60
Summary of Contents for 2008 Allure
