Buick 2008 Allure, Owner'S Manual

Page: 210 / 426

Setting Preset Stations
Up to 30 stations (six FM1, six FM2, six AM, six XM1™
and six XM2™ (if equipped)) can be programmed
on the six numbered pushbuttons.
To program either radio:
1. Turn the radio on.
2. Press BAND to select FM1, FM2, AM, or XM1™
or XM2™ (if equipped).
3. Tune to the desired station.
4. Press EQ to select the equalization.
5. Press and hold one of the six numbered
pushbuttons until the radio beeps once. When
that numbered pushbutton is pressed again, the
station and equalization that were stored, returns.
6. Repeat the steps for each pushbutton.
Setting the Tone (Bass/Treble)
e (Bass/Treble): Press and release until BASS or
TREBLE displays. Turn this knob to increase or to
decrease the bass or treble.
Press and hold to adjust the bass and treble to the
middle position. The radio beeps once.
To adjust all tone and speaker controls to the middle
position, press and hold when no tone or speaker
control displays. ALL CENTERED displays and the
radio beeps once.
EQ (Equalization): Press to select customized
equalization settings.
To return the bass and treble to the manual mode,
press and release until BASS or TREBLE displays.
Adjusting the Speakers (Balance/Fade)
e (Balance/Fade): To adjust the balance between
the right and the left speakers, press and release until
BAL (balance) displays. Turn this knob to move the
sound toward the right or the left speakers.
To adjust the fade between the front and the rear
speakers, press and release until FAD (fade) displays.
Turn this knob to move the sound toward the front
or the rear speakers.
To adjust the balance and the fade to the middle position,
press, then press and hold until the radio beeps once.
To adjust all tone and speaker controls to the middle
position, press and hold when no tone or speaker control
displays. ALL CENTERED displays and the radio
beeps once.
3-84