Buick 2007 Terraza Owner'S Manual Download Page 159

Page: 159 / 562

Overhead Console (With Rail)

If your vehicle is equipped with an overhead
console, it may contain the following:

•

Reading lamps. See

Front Reading Lamps on

page 186

Rear Reading Lamps on

page 186

•

Switchbank. See

Overhead Console

Switchbank on page 188

•

OnStar

System buttons. See

OnStar

System on page 145

•

Universal Home Remote buttons. See

Universal Home Remote System (With Three
Round LED) on page 147

Universal

Home Remote System (With One Triangular
LED) on page 148

See your dealer to purchase additional items for
the rail system.

Storage Bin

Your vehicle may have a storage bin located on
the overhead rail that you can use for storage.

If your bin is equipped with the finger size latches
do the following:

1. Place the storage bin on to the rails in the

desired location.

2. Push firmly upward on the bin while supporting

it with one hand.

3. Push in on the latch and then rotate it

90 degrees.

159

Summary of Contents for 2007 Terraza



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Terraza

Reviews:

Related manuals for 2007 Terraza

Brands by name

Popular brands

Buick 2007 Terraza, Owner'S Manual

Search results

Summary of Contents for 2007 Terraza

Reviews:

Related manuals for 2007 Terraza

Brands by name

Popular brands