Delayed Locking
The delayed locking feature can be programmed to
one of the following modes:
ON: Lock your vehicle using the power door lock switch
or the remote keyless entry transmitter while any door
is opened, you will hear three chimes and the doors will
not lock. Five seconds after the last door is closed,
all doors will lock.
Once delayed locking is programmed to ON, you can do
the following:
•
Cancel the delayed locking by pressing unlock
using the power door lock switch or by fully inserting
the key in the ignition
•
Override the delayed locking feature by pressing lock
immediately using the power door lock switch
•
Let the delayed locking feature complete the locking
of the vehicle
OFF: The doors will always lock immediately when you
lock the doors using the power door lock switch or
press LOCK on the remote keyless entry transmitter.
Your vehicle was originally programmed to ON.
The mode may have been changed since then.
To determine the current mode, or to change the mode,
do the following:
1. Follow the instructions for “Entering Programming
Mode” listed previously.
2. Press the MODE button until DELAYED LOCKING
appears on the DIC.
3. Press the SET button until the arrow is before
ON or OFF.
The mode you selected is now set. You can either
exit programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
3-69
Summary of Contents for 2006 Rendezvous
