Buick 2002 Rendezvous Owner'S Manual Download Page 27

Page: 27 / 455

1-15

Removing the Captain’s Chairs

1. Make sure that the seatback is in the

upright position.

2. Lift the seatback recliner lever to fold the

seatback forward.

3. Pull up on the lever, located at the base on the

outboard side of the seat, to release the rear latches
from the floor pins.

4. The seat can then be lifted off the front floor pins.

5. Remove the seat by rocking it slightly toward the

rear of the vehicle and then pulling it out.

Repeat these steps for the other captain’s chair.

Summary of Contents for 2002 Rendezvous








































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Rendezvous

Reviews:

Related manuals for 2002 Rendezvous

Brands by name

Popular brands

Buick 2002 Rendezvous, Owner'S Manual

Search results

Summary of Contents for 2002 Rendezvous

Reviews:

Related manuals for 2002 Rendezvous

Brands by name

Popular brands