Buick 2002 Rendezvous Owner'S Manual Download Page 384

Page: 384 / 455

6-37

8. Unhook the electrical connector by lifting up the

gray tabs and separate the connector from the
bulb base.

9. Install the new bulb into the electrical connector.

Push the bulb firmly enough so that the gray tabs
hook over the tab on the bulb.

10. Carefully put the bulb assembly back into the lamp

housing and turn the bulb socket one

quarter of a

turn counterclockwise.

11. Align the retaining clips on the back of the

headlamp with the rectangular holes in the
mounting panel.

12. Push firmly on both ends of the headlamp to snap it

into position.

13. Push the retaining clip down to its original position.

14. Reinstall the wing stud.

Summary of Contents for 2002 Rendezvous








































































































































































































































































































































































































































































Search results

Summary of Contents for 2002 Rendezvous

Reviews:

Related manuals for 2002 Rendezvous

Brands by name

Popular brands

Buick 2002 Rendezvous, Owner'S Manual

Search results

Summary of Contents for 2002 Rendezvous

Reviews:

Related manuals for 2002 Rendezvous

Brands by name

Popular brands