Buick 2002 Park Avenue Owner'S Manual Download Page 311

Page: 311 / 395

6-47

3. Push the tab on the wiper blade assembly and pull

the assembly down enough to release it from the “U”
hooked end of the wiper arm. Slide the assembly
away from the arm.

4. Replace the blade.

5. To reinstall the wiper blade assembly, slide it over

the wiper arm to engage the “U” hooked end on the
wiper blade assembly. Pull up on the assembly to
lock it into place.

Summary of Contents for 2002 Park Avenue











































































































































































































































































































































































































Search results

Summary of Contents for 2002 Park Avenue

Reviews:

Related manuals for 2002 Park Avenue

Brands by name

Popular brands

Buick 2002 Park Avenue, Owner'S Manual

Search results

Summary of Contents for 2002 Park Avenue

Reviews:

Related manuals for 2002 Park Avenue

Brands by name

Popular brands