Buick 2002 Park Avenue Owner'S Manual Download Page 304

Page: 304 / 395

6-40

1. Turn the horizontal

aiming screw (A)
until the
indicator (B) is
lined up with zero.

2. Turn the vertical aiming screw (C) until the level

bubble (D) is lined up with zero.

Front Turn Signal

1. Once the headlamp assembly has been removed,

reach down from the top of the vehicle and, while
pressing the lock tab on the socket, turn the socket
one

quarter turn counterclockwise and pull it out.

2. Remove the old bulb by

pulling it straight out of
the socket.

3. Replace the bulb and turn the bulb assembly back

into place.

Summary of Contents for 2002 Park Avenue











































































































































































































































































































































































































Search results

Summary of Contents for 2002 Park Avenue

Reviews:

Related manuals for 2002 Park Avenue

Brands by name

Popular brands

Buick 2002 Park Avenue, Owner'S Manual

Search results

Summary of Contents for 2002 Park Avenue

Reviews:

Related manuals for 2002 Park Avenue

Brands by name

Popular brands