Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Messgaskühler / Sample Gas Coolers PKE-5xx
BX440010 08/2013 Art. Nr. 90 31 105
29
6 Appendices
6.1 Safety Instructions
NOTE
Trained staff only shall install the device. Check for correct supply voltage.
The cooler must not be operated out of the range of its specifications.
Regard the corresponding safety and operation regulations during maintenance or servicing.
Only perform modifications, servicing or mounting described in this manual.
Any manipulation on the gas cooler which is not described in this manual should only be
executed by Bühler authorised staff.
Only use original spare parts.
DANGER
Hazardous voltage
Electrocution hazard
Before any manipulation on the device, disconnect the electrical equipment from
the main power supply. Make sure that the electrical equipment cannot be
reconnected during repair or maintenance. The wiring must be done by trained
staff only.
DANGER
Toxic / corrosive gases and liquids
Poisoning, chemical burn of skin, eyes and lungs possible
Protect yourself against toxic / corrosive gases and liquids. If necessary wear
protection gloves, respirator and face protector.
Summary of Contents for PKE 511
Page 45: ......
