manualshive.com logo in svg

Buhler FK370, Operator And Parts Manual

The Buhler FK370 Operator and Parts Manual is a comprehensive guide for users of this exceptional product. Easily download this manual for free from our website, to gain helpful insights, instructions, and maintenance tips. Maximize your experience with the Buhler FK370 by accessing this invaluable resource at manualshive.com.

Share
Download
background image

                                     

                                         16” Backsaver Auger 

 

RECOMMENDED CUSTOMER GREASING PROCEDURE FOR 

50 DEGREE DOUBLE C.V. PTO 

 

 

 

A general purpose grease may be used.  However, a grease containing 3% 
molybdenum disulfide will allow the lube intervals to be extended to twice as long as 
that listed.  The first lube interval should be 16 – 24 hours of operation after initial start-
up; then follow the schedule below.  Constant angle applications must have a lube 
interval of 4 hours. 
 

LUBE RECOMMENDATIONS 

 

INTERVAL  LOCATION 

 

AMOUNT 

 
8 hrs. 

Cross & Bearings 

 

1 pump 

8 hrs. 

Telescoping Members 

4-8 pumps (until grease comes out of end) 

8 hrs. 

CV Ball & Socket 

 

1-2 pumps 

 
Greases containing various percentages of moly. are available as extreme pressure 
greases.  Please note that not all E.P. greases contain moly so some investigation may 
be necessary.  The following greases all contain 3% moly:  Mobile Oil Company, 
“Mobile Grease CMP”; Shell Oil Company, “Retinax AM”; and Texaco, “Molytex EP (#0) 
and (#2)”. 

 
 
 
 
 
 

 

25

Summary of Contents for FK370





























































Reviews:

No comments

Related manuals for FK370

Yamaha A3000 Upgrade Manual preview
A3000
Brand: Yamaha Pages: 50
A&D PT Series Instruction Manual preview
PT Series
Brand: A&D Pages: 30
Daga AB Directions For Use Manual preview
AB
Brand: Daga Pages: 24
DAF DAVIE XDc II Quick Start Manual preview
DAVIE XDc II
Brand: DAF Pages: 68
Halyard MIC-KEY Instructions For Use Manual preview
MIC-KEY
Brand: Halyard Pages: 88
HALDER EH 2B353 Short Instruction Manual preview
EH 2B353
Brand: HALDER Pages: 2
Hällde RG-200 User Instructions preview
RG-200
Brand: Hällde Pages: 40
Hällde RG-400i User Instructions preview
RG-400i
Brand: Hällde Pages: 6
H&S 5126 Operator'S Manual preview
5126
Brand: H&S Pages: 42
TAKAYA APT-9411 Series Service Manual preview
APT-9411 Series
Brand: TAKAYA Pages: 77
Tadano TR-800XXL4 Service Manual preview
TR-800XXL4
Brand: Tadano Pages: 402
UniPix ATMOS Operation Manual preview
ATMOS
Brand: UniPix Pages: 24
Quadro mdb MOBIL Construction Manual preview
MOBIL
Brand: Quadro mdb Pages: 11
SprotDog Pro hunter 2525 Operating Manual preview
Pro hunter 2525
Brand: SprotDog Pages: 28
Barikell MK8 90 Instructions For Use Manual preview
MK8 90
Brand: Barikell Pages: 32
Atlas Metal WB SERIES Manual preview
WB SERIES
Brand: Atlas Metal Pages: 2
DS Produkte XMLT-24ELED-200CA8-1 Instruction Manual preview
XMLT-24ELED-200CA8-1
Brand: DS Produkte Pages: 28
Larson Electronics EPL-HB-150LED-RT-IBSC Instruction Manual preview
EPL-HB-150LED-RT-IBSC
Brand: Larson Electronics Pages: 2

Brands by name

Popular brands

Load more brands