WBMR-HP-GNV2 User Manual
8
Chapter 1 Product Overview
*1
Turn off AirStation first, wait for a few seconds, then turn it back on.
*2
If the Power LED keeps blinking, do not turn off the AirStation nor unplug its power
cable.
2
Security LED (Amber)
Indicates security status.
Off :
AOSS or Encryption is not set.
On :
AOSS/WPS activated; accessed to exchange security keys.
Encryption has been set.
2 blinks :
The unit is waiting for an AOSS or WPS security key.
Blinking :
AOSS/WPS error; failed to exchange security keys.
Note : The Security LED is lit if an encryption key has been set.
3
Wireless LED (Green)
Indicates wireless LAN status.
On :
Wireless LAN is transmitting.
Off :
Wireless LAN is not active.
4
DSL LED (Green)
Indicates DSL status.
On :
The DSL port is connected.
5
Internet LED
Indicates Internet status.
On (Green) :
Connected to Internet
Blinking (Green) : Communicating over Internet
On (Red) :
Not connected to Internet
Off :
Operating in bridge mode
6
DC Connector
Connect the included AC adapter here.
7
LAN LED (Green)
On :
An Ethernet device is connected.
Blinking :
An Ethernet device is communicating.
8
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub
supports 10 Mbps, 100 Mbps connections.
9
DSL Port
Connect your ADSL line to this port.
Summary of Contents for WMBR-HP-GNV2
Page 1: ...User Manual Broadband ADSL2 Modem Router WBMR HP GNV2 www buffalotech com 35011767 ver 01...
Page 34: ...Chapter 4 Configuration WBMR HP GNV2 User Manual 33 AOSS AOSS Status and Settings...
Page 55: ...WBMR HP GNV2 User Manual 54 Chapter 4 Configuration ECO Configure Eco mode from this screen...
