Chapter 5 Connect to a Wireless Network
WBMR-HP-GNV2 User Manual
71
Manual Setup
You can also connect to the AirStation without installing Client Manager V or Client Manager 3 by
using the utility built-in to Windows. The procedure varies depending on which version of Windows
you are using.
Note: · If the AirNavigator CD is used to perform setup when making the initial settings of AirStation, the
wireless connection settings for the AirStation are completed during the Setup process. As a result, you
do not need to make the settings below. After setup is complete, once the LAN cable is removed, you
can connect from your wireless client to the AirStation.
· Before performing setup, make the settings to enable the wireless client of the computer.
Windows 7 (WLAN AutoConfig)
With Windows 7, use WLAN AutoConfig to connect to the AirStation.
1
Click on the network icon
in the system tray
.
2
Select the target AirStation’s name and click
[Connect]. If you will be connecting to this
device in the future, checking [Connect
automatically] is recommended.
Summary of Contents for WMBR-HP-GNV2
Page 1: ...User Manual Broadband ADSL2 Modem Router WBMR HP GNV2 www buffalotech com 35011767 ver 01...
Page 34: ...Chapter 4 Configuration WBMR HP GNV2 User Manual 33 AOSS AOSS Status and Settings...
Page 55: ...WBMR HP GNV2 User Manual 54 Chapter 4 Configuration ECO Configure Eco mode from this screen...
