Buffalo WLE-POE-S, Setup Manual

Page: 1 / 8

■
NOTE: The WLE-POE-S Supply Adapter must be used with a compatible
AirStation or POE Receiver when supplying power to the AirStation. Check the
specifications on Page 4 to verify compatibility.
Package Contents:
Power Over Ethernet Supply
Connecting to your
Power-Over-Ethernet Supply Adapter
(WLE-POE-S)
The WLE-POE-S Power Supply Adapter is an
adapter for supplying power the AirStation. Using
this product enables compatible AirStations or
AirStations with a compatible POE Receiver
Adapter to be used in locations that are not
provided with a nearby power source.
PY00-29024-DM20
◗
POE Supply Adapter 1
◗ Power Supply Cable 1
◗ Setup Guide 1
◗ Warranty Certificate 1
Precautions:
◗
Connect the AC adapter last.
◗ Always connect the POE-compatible AirStation to the POE port.
◗ The Receiver and Supply cannot be attached by CAT5 longer then 100M.
◗ Use POE CAT5 cables (all eight wires)
◗ Use commercially available CAT5 cables. Using cables prepared by the
user may result in the network configuration not functioning properly.
◗ The products will become warm during use; this does not indicate
malfunction.
Screw holes
POE ports
Connect to the POE-compatible AirStation
or WLE-POE-R Adapter.
Air vents
AC Adapter
Power indicator
Lit green when the product is connected
to the AC outlet.
LAN port
Connect to hub, etc.