Using your LinkStation
LinkStation User Manual
33
Configure your FTP client software with the following settings:
• Host Name
IP address of the LinkStation.
• Username
Username registered on the LinkStation
• Password
Password registered to the LinkStation
• Port
21
Example ftp://192.168.11.150/
• You cannot write by FTP if the shared folder is set to read-only on the LinkStation.
• Access restrictions are applied based on the settings in the LinkStation. The restrictions
are not displayed for users without permissions for the share.
• To access your FTP share from outside of your network, you may need to configure your
router and firewall. Consult your router documentation for more information.
• Shared folders appear as follows when connected by FTP:
- disk1 share
- usbdisk1
- info
• The internal hard drive of the LinkStation is displayed as disk1, and a USB hard drive
(optional) will be displayed as usbdisk1.
• "usbdisk1" is not displayed when the USB hard drive is not connected, or if access is
restricted.
To access to the LinkStation with an FTP client