Buffalo CT253 Installation, Operating And Maintenance Instructions Download Page 10

8. BEFORE THE INSTALLATION

8.2

Installation must be carried out in compliance with applicable standards.   

Manufacturer does not take any responsibility for any damage and error 

arising from transportation, installation, service and user fault.

8.3 During installation, the following must be checked according to all applicable 
law, regulation and instructions.

Work safety and accident prevention instructions.

Warning signs.

Work fields and departments as categorised by the hygiene rules.

Fire safety

Fresh air supply.

Chimney gas suction for the purpose of environmental protection.

8.4 VENTILATION AND SMOKE EXHAUSTION

1.

Never place the appliance in locations where exhaustion 
of smoke might blocked.

2.

Sufficient ventilation and continuous fresh air supply 
(door sill openings, air condition systems) must be 
maintained in the location where the appliance is to be 
installed. Otherwise an efficient gas burning cannot be 
achieved in your appliance, or this might cause risks to
the user.

3.

The appliance should only be operated under an 
extraction canopy in accordance with DW172(2018). 
allowing gas exhaustion to open air (to the atmosphere).

4.

The appliance must be used in a well-ventilated place to 
avoid the creation of dangerous mixtures of unburnt 
gases in the room. Whenever possible, pre-heat only 
before use. 

5.

Air recirculation must take in account the air necessary 
for combustion, 2 m³/h/kW gas power, and also the “well-
being” of those working in the kitchen.

10/22

AVAILABILITY OF APPROPRIATE GAS INSTALLATION FOR THE APPLIANCE TO BE 

INSTALLED

8.1 

Customer is responsible to ensure suitable for installation on their premises for

appliance to be installed by gas safe certified engineer.

8.5 

If necessary, contact with the company that has installed the gas pipework, to obtain 

required information.

These instruction are only valid if the appliance is labelled with the country code. If the 
country code is not present on the appliance, please refer to the technical instructions in 
order to ensure that your appliance complies with the requirements in your country.

Summary of Contents for CT253























Reviews: