19
18
Chapter 1 Product Overview
- 9 -
Bottom
18
Reset button
To reset all settings, hold down this button until the Buffalo LED turns red
(about 3 seconds). The power must be on for this to work.
19
Setup card slot
This is the slot where the AirStation setup card is stored. The initial
settings for the username, password, SSID, and encryption type are
provided on the card for logging into the configuration interface.
13
Internet Port
10 Mbps, 100 Mbps, and 1000 Mbps connections are supported.
Note: In bridge/AP mode (router off), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports.
14
LAN LED (Green)
On:
An Ethernet device is connected.
Blinking:
An Ethernet device is communicating.
15
Internet LED (Green)
On:
The Internet port is connected.
Blinking:
The Internet port is transmitting data.
16
Power button
This button turns the power on and off.
17
DC connector
Connect the included AC adapter here.
