- 14 -
Chapter 2 Installation
4
Once your computer has booted, the AirStation’s LEDs should be lit as described below:
Power
On.
Wireless
On or blinking.
Internet access On.
Router
On.
LAN
On or blinking.
Internet
On or blinking.
For LED locations, refer to chapter 1.
Note: If the router LED is not lit, hold down the router button to switch to router mode.
5
If using a wired LAN, connect the AirStation LAN port and computer using a LAN cable.
If using a wireless LAN, connect the computer to the wireless LAN.
6
Turn on the AirStation, then wait one minute.
Note : If the power does not turn on even when the AC
adapter is connected, press the Power button on
the rear of the AirStation.
