49
If you have two TeraStations, then you may
configure one to replicate all data in a folder on
the other. Any changes to files in a share on
the Source TeraStation will be duplicated in a
backup folder on the Target TeraStation.
To configure replication, connect both
TeraStations to a network, or connect an open
Ethernet port on the Source TeraStation to an
Ethernet port on the Target TeraStation.
Open the Web Admin Tool for the Source
TeraStation and navigate to
System/Backup/
Replication
. Click
Add
.
Replication
Select the source and destination folders for replication and click
Save
.
Note: When replication is first configured, existing files are not immediately copied from Source
to Target until a new file is created locally, or
Resynchronization
is clicked in
System /Backup/
Replication
of the Web Admin Tool. Remote additions to the Source folder by Backup and
WebAccess are also not replicated until a file is added locally to the Source folder, triggering the
synchronization, or
Resynchronization
is clicked. With firmware 1.01 or later, remote additions to
the source folder via FTP or FTPS are synchronized immediately.
