32
■
Note: The lower the rekey
interval, the more often a rekey
occurs. Setting a low rekey in-
terval may affect performance
negatively.
LAN Port
Set the LAN side Ethernet
settings.
LAN Side IP Address
- Allows
ad min is tra tor to specify a static
IP and Subnet Mask for the
LAN side of the AirStation.
■
Note: If the AirStation’s IP
address is changed, the confi guring computer’s IP must be changed to the same range to continue
confi guration. If the LAN IP is changed, restart the AirStation. (Section 4.4.10). If the IP address is
changed, then the DHCP scope must be changed to match.
DHCP Server Function
- Allows administrator to enable/disable the DHCP server function for the
AirStation LAN side. Select
Use
to enable and
Do not use
to disable the function. Once
Use
is
selected, the assigned IP address range can be specifi ed. Enter the starting LAN IP address and
total number of computers the DHCP server can accomidate.
■
Note: If there is another DHCP server on the network, one either must be disabled or the IP
LAN Port
Settings
Advanced Settings
