27
ping channels. Channels 1, 6 and 11 are non-overlapping. The ‘Auto-Channel’ option is recommended, as
it constantly assesses the best available channel for the AirStation to operate on.
If there are multiple APs in close proximity using the same channel, there may be interference. In this
case, change to a non-overlapping channel.
Privacy Separator -
Enable or disable communication between wireless clients. If you choose to use this
feature, every wireless client that is associated to the AirStation will not be able to communicate with any
other wireless clients.
■
Note: If this function is used, wired clients can still communicate with wireless clients.
BSS (Basic Service Set) Basic Rate Set -
The transmission data rates offered by the AirStation. It is
recommended to use the ‘Default’ selection to accomidate 802.11 and 802.11b rate sets. It is NOT recom-
mended to use the ‘All’ selection, as some devices may not understand all of the rate sets offered by the
AirStation.
Frame Bursting -
This function increases 802.11g communication throughput by transferring packets more
efficiently. The following conditions affect this function:
• The wireless LAN client adapter must support Frame Bursting (and it must be enabled). If the wireless
LAN client adapter does not support Frame Bursting, or Frame Bursting is not enabled, then it will
operate at non-Frame Bursting speeds.
125* High-Speed Mode -
This function increases the router’s speed beyond that of normal 802.11g com-
munication. Rate sets up to 125* Mbps are offered to clients. Note:
• The wireless LAN client adapter must support 125* High-Speed Mode, and have it enabled, for the
network to operate in 125* High-Speed Mode. If the wireless LAN client adapter does not support
125* High-Speed Mode, or it is not enabled, then the wireless network will operate at regular 802.11g
Advanced Settings
