Buell 2005 FIREBOLT, Service Manual, Page: 97 / 621

2-36 2005 Buell Firebolt: Chassis
HOME
6. See Figure 2-50. Disconnect brake light connector
located under the seat.
7. See Figure 2-51. Remove rear brake light switch (1)
(metric) and two copper crush washers (3) to detach
brake line (2) from master cylinder (4). Discard copper
crush washers.
8. Remove right side rider footpeg mount. See 2.29 FOOT-
PEG, HEEL GUARD AND MOUNT .
9. See Figure 2-51. Remove fasteners (11) (metric) to
detach master cylinder (4) from rider footpeg mount.
10. See Figure 2-52. Detach remote reservoir.
a. Remove top clamp (4) on hose connected to master
cylinder.
b. Remove fastener (2) to detach reservoir (1) from
frame if necessary.
Figure 2-50. Brake Line Switch Connector
Figure 2-51. Rear Master Cylinder Assembly
8442
b0983a2x
1. Rear brake light switch assembly
2. Brake line
3. Copper washer
4. Rear master cylinder body
5. Clevis pin
6. Pedal bearing
7. Sleeve
8. Brake pedal fastener
9. Brake pedal
10. Cotter pin
11. Rear master cylinder mount screw
4
5
7
8
6
10
9
2
1
3
11
Figure 2-52. Remote Reservoir
8359
1. Reservoir
2. Fastener and washer
3. Remote reservoir hose
4. Clamp
3
4
2
1