Buell 2002 S3T, Service Manual

Page: 32 / 450

1-4 2002 Buell S3T: Maintenance
HOME
Screwdrivers
●
Don’t use a screwdriver for prying, punching, chiseling,
scoring or scraping.
●
Use the right type of screwdriver for the job; match the tip
to the fastener.
●
Don’t interchange POZIDRIV
®
, PHILLIPS
®
or REED
AND PRINCE screwdrivers.
●
Screwdriver handles are not intended to act as
insulation; don’t use on live electrical circuits.
●
Don’t use a screwdriver with rounded edges because it
will slip – redress with a file.
Ratchets and Handles
●
Periodically clean and lubricate ratchet mechanisms with
a light grade oil. Do not replace parts individually;
ratchets should be rebuilt with the entire contents of
service kit.
●
Never hammer or put a pipe extension on a ratchet or
handle for added leverage.
●
Always support the ratchet head when using socket
extensions, but do not put your hand on the head or you
may interfere with the action of its reversing mechanism.
●
When breaking loose a fastener, apply a small amount of
pressure as a test to be sure the ratchet’s gear wheel is
engaged with the pawl.
Sockets
●
Never use hand sockets on power or impact wrenches.
●
Select the right size socket for the job.
●
Never cock any wrench or socket.
●
Select only impact sockets for use with air or electric
impact wrenches.
●
Replace sockets showing cracks or wear.
●
Keep sockets clean.
●
Always use approved eye protection when using power
or impact sockets.
Storage Units
●
Don’t open more than one loaded drawer at a time.
Close each drawer before opening up another.
●
Close lids and lock drawers and doors before moving
storage units.
●
Don’t pull on a tool cabinet; push it in front of you.
●
Set the brakes on the locking casters after the cabinet
has been rolled to your work.