Budget Robotics - TankBot Servo
Page 6
Copyright (c) 2002-2006, Budget Robotics
Step 5
Using a #0 Phillips screwdriver,
along with a box wrench or pair
of pliers, tighten the locking nut
on each of the four rollers.
Best results can be obtained with
the following:
1. Tighten the nut so that the
roller no longer freely
rotates.
2. Untighten by 1/8 of a turn
until the roller spins
without binding. Do not
untighten to the point
where the roller becomes
wobbly.
