Installation
7
Logano plus SB615 - Technical specifications are subject to change without prior notice.
14
z
Screw lower rear panel section (on SB615/145 to 310
boilers) to the side panel flanges using 5 self-tapping
screws.
z
Locate Z-section edge of upper rear panel behind the
lower rear panel, hold panel against side panel flanges
and attach with 4 self-tapping screws.
z
Screw 1 or 2 cable clips or cable guide to top section
of rear panel (Fig. 10).
z
Screw rear panel to side panel flanges using 4 self-tap-
ping screws on each side (on SB615/400 to 640 boil-
ers) (Fig. 11).
z
Screw 1 or 2 cable clips or cable guide to top flanged
edge.
Fig. 10
Screwing rear panel sections in place (boiler
SB615/145 to 310)
Item 1: Lower rear panel
Item 2: Upper rear panel
Item 3: Cable clamp
7 747 015 037-06.2RS
3
3
2
1
USER NOTE
On the SB615/145 to 310 boilers, the rear
panel consists of 2 sections (Fig. 10),
whereas on the SB615/400 to 640 boilers
use only one piece (Fig. 11).
USER NOTE
Screw top self-tapping screws into holes in
cross-member.
Fig. 11
Screwing rear panel in place (boiler SB615/400
to 640)
Item 1: Rear panel section
Item 2: Cable clip
7 747 015 037-07.1RS
2
2
1
USER NOTE
Screw top self-tapping screws into holes in
cross-member.
