1. 8mm open-ended spanner
dealer to source
2. 19mm open-ended spanner
dealer to source
3. Thermometer (K-type)/salinity meter
6005-0996
4. 2m/kG calibrated torque wrench
6005-0997
with 19mm socket (½” square drive)
5. Digital volt meter and leads
dealer to source
6. BathyCorrometer
®
service tool (T-bar)
6005-0313
7. BathyCorrometer
®
locking ring tool
6004-0007
8. Pipe grips
dealer to source
9. De-ionized water (10L)
dealer to source
10. K-Cell adaptor leads
6004-0018
11. Tamper-evident seal/paint
dealer to source
12. Crimp tool
JST WC-240 (Farnell 3617270)
13. BathyCorrometer
®
Calibration Kit
6004-0031
14. Soldering Iron
dealer to source
15. Wire cutters
dealer to source
16. Long nose pliers
dealer to source
17. Lead-free solder
dealer to source
18. Cleaning cloth
dealer to source
19. Hammer
dealer to source
20. Handle sealing plug
6005-0312
21. Half-cell sealing plug
6005-0311
22. Trim Tool
6005-0084
23. Suction puller cup
2006-0036
24. Pressure tank capable of 600psi
dealer to source
2.
Preparation
Workspace
A robust workspace/bench is required and should be clean and free from debris. All testing and calibration equipment such as pressure chambers
and multimeters should be checked and calibrated annually by recognised or approved sources.
Tools required
In order to check and fully test a BathyCorrometer
®
Pro’, the following service and calibration tools are required:
Items with part numbers may be
purchased from Buckleys
1
2
3
4
5
6
7
8
16
17
14
15
12
13
9
11
23
24
21
22
19
20
10
18
BathyCorrometer
®
M k V
t o P R O ’ U P G R A D E M A N U A L