Buckleys 6004-0079, Operating Instructions Manual, Page: 8 / 12

Instruction Manual
8
Repeat these steps until no further adjustment is required. Replace the cover
on the meter and bezel on the case (if it was removed) and remove all
connecting leads. The Surface Display Pro’ is now ready for use.
Note: All other controls are factory set and should not be adjusted.
Adjustment of the other controls will cause the Surface Display Pro’ to
produce an incorrect readout.
Maintenance
The Buckleys Surface Display Pro’ has been designed so that no maintenance
is required by the user.
The Surface Display Pro’ should be inspected from time to time to check
that the case, calibration leads and mains cable have not been
damaged. If damage is found the unit must not be used and it must be
returned to the manufacturer for repair.
Disposal information
Producer registration number: WEE/HJ0051TQ
This product must be disposed of in accordance with UK WEEE
regulations.
For further information on UK WEEE regulations click on:
www.gov.uk/government/publications/weee-regulations-2013-government-
guidance-notes