Buchi Syncore, Operation Manual

Page: 3 / 46

Syncore
Platform
3
Table of contents
Table of contents
en, Version E (43 pages) Order code
Syncore Instructions 093008
1 Scope of delivery 2
2 Safety 6
3 Function 10
3.1 The single platform 10
3.2 Syncore Analyst R-4, R-6 and R-12 11
3.3 Individual components 11
3.4 Syncore Polyvap R-4 to R-96 12
4 Putting into operation 14
5 Operation 17
5.1 The single platform 17
5.2 Safety instructions 17
5.3 Temperature and RPM 19
5.4 Programm mode: Temperature / Time steps 20
5.5 Further control parameters 22
5.6 Pre-set safety settings 23
5.7 Overview of switches 24
5.8 Signal outlets 25
5.9 After running of the programmable valve 26
5.10 RS-232 interface 26
5.11 Signal inlets 27
5.12 Adjusting the eccentricity 28
5.13 Unbalance compensation 30
5.14 Troubleshooting: the single platform 33
6 Maintenance 34
6.1 Cleaning 34
6.2 Routine inspection of the equipment (monthly) 34
6.3 Routine inspection of the equipment (annually) 35
6.4 Calibration 35
6.5 Error messages: Calibration 37
6.6 Replacement of the fuses 37
6.7 Error Messages: Hardware 38
6.8 Customer service 38
7 Taking out of Operation 39
8 Replacement Parts 40
8.1 Single platform 40
9 Appendix 41
9.1 Technical data 41
9.2 Materials used 41
9.3 FCC requirements (for USA and Canada) 42
9.4 Declaration of conformity 43
Read this Operation Manual through care-
fully before starting to use the
Syncore
Product Line.
Always keep these instructions ready at
hand close to the equipment so that they
may be consulted quickly at all times. Chap-
ter 2 provi des important safety instruc tions
that must be followed to ensure safe ope-
ra tion of the unit.
We reserve the right to make technical chan ges without
prior notice. No portions of this Ope ration Manual may be
re pro duced in any form (including with the use of electronic
or optical systems), duplicated, or distributed without written
permission from BÜCHI Labortechnik AG. All rights reserved.
Copyright © BÜCHI Labortechnik AG 2013