Buchi Syncore, Operation Manual

Page: 34 / 46

Syncore
Platform
34
6 Maintenance
6 Maintenance
6.1 Cleaning
Single platform
• Use a cloth dampened in alcohol to clean the housing of
the Syncore single platform. If it is severely fouled, a mild
detergent and water may be used.
• Never use hard brushes to clean the base plate.
• If it is severely fouled, the black rubber ring around the
base plate may be removed and cleaned with a mild
detergent or with alcohol.
6.2 Routine inspection of the equipment
(monthly)
General
• The unit must run quietly, without any significant noises
from its drive.
• The unit must run without any strong vibrations.
Rack mount
Check the corner brackets

and the springs

for the rack
mount on the base plate:
• No broken sections;
• Screws screwed tightly into the corner brackets;
• Rack held securely in place.
Base plate mount
The base plate rests on four vibrating elements that take up
the vibrations of the base plate.
Inspect these visually once a month:
• No broken sections;
• No wear;
• No loose bolting
To do this, lift the black covering slightly and look into the
unit from the side.
Figure 26: Corner brackets and springs

