44
1. Each current can be shown in 3 ways: an histogram, a value and a percentage; all calculated with
the same accuracy rule:
VALUE has no more than 6 spaces. If VALUE ≤ 9999 is shown on 4 digits plus the symbol “A”,
using so 5 spaces. If instead 9999 < VALUE < 99999 digits are only 3 with a decimal digit divided
by a dot and followed by “k” and “A” symbols (so 6 spaces) and are obtained reducing VALUE
to the nearest lower decimal (Example: 12550 A become 12500 and is shown as 12.5kA). If is
VALUE≥99999 digits are still 3, but are hundred, decine and unit, obtained once more reducing
to the nearest lower unit and followed by the symbols “k” and “A” (so 5 spaces). (Example:
245650 A become 246000 and is shown like 246kA).
If PERCENTAGE > 999% is shown the symbol > > > %.
2. Histograms of currents can shown values among 0 and 1,2*I threshold [A], where I threshold
is the threshold current for thermal protection (Ir); if detected current is higher than maximum
value, the histogram is shown complete (so equivalent to a threshold of 120%).
1 8 A 1 % I 1
5 6 5 A 5 6 %
I 2
1 0 0 0 A 1 0 0 % I 3
1 1 k A > > > %
N
3. Temperature is shown in 3 ways: an histogram, a value and a percentage; all calculated with
the same accuracy rule. VALUE has no more than 5 spaces, 3 digits (only integer values) and the
symbol “°C”. If PERCENTAGE > 999% is shown the symbol > > > %.
4. Temperature histogram shows values among 0 and 95 [°C]; if detected temperature is higher than
maximum value histogram is shown complete (so equivalent to 95°C).
5. Residual charge on battery is shown in 3 ways: an histogram, a value and a percentage; all calcu-
lated with the same accuracy rule. VALUE has no more than 5 spaces, 3 digits (decine, unit and
1 decimal digit separated by a dot) and the symbol “V”.
6. Histogram of residual charge on battery shows values among 0 and 12 [V]; if detected battery is
higher than maximum value histogram is shown complete (so equivalent to 12V). Additionally,
for
absolute values
of voltage ≤ Val. Min. Batt. (settable parameter, see Main page – System
options), is shown an empty histogram and the message “Change battery” instead of the per-
centage value.
c h a n g e
b a t t e r y
The defaul setting of Val. Min. Batt. is 10.5 V.
8. Setting
of currents
visualisation
9. Visualisation
rules for
temperature
10. Visualisation
rules for battery
charge
Summary of Contents for Megabreak MP4 Series
