Effective October 2009
Instructional Leaflet IL70C1037H05
Digitrip models 520, 520
i; and 520M, 520Mi,
520MC, 520MC
i trip units for use only in
Magnum and Magnum DS circuit breakers
m
WARNING
DO NOT ATTEMPT TO INSTALL OR PERFORM
MAINTENANCE ON EQUIPMENT WHILE IT IS
ENERGIZED. DEATH OR SEVERE PERSONAL INJURY
CAN RESULT FROM CONTACT WITH ENERGIZED
EQUIPMENT. ALWAYS VERIFY THAT NO VOLTAGE IS
PRESENT BEFORE PROCEEDING. ALWAYS FOLLOW
SAFETY PROCEDURES. EATON IS NOT LIABLE FOR
THE MISAPPLICATION OR MISINSTALLATION OF
ITS PRODUCTS.
m
WARNING
OBSERVE ALL RECOMMENDATIONS, NOTES,
CAUTIONS, AND WARNINGS RELATING TO THE
SAFETY OF PERSONNEL AND EQUIPMENT. OBSERVE
AND COMPLY WITH ALL GENERAL AND LOCAL HEALTH
AND SAFETY LAWS, CODES, AND PROCEDURES.
Note:
N
The recommendations and information contained
herein are based on experience and judgement, but
should not be considered to be all inclusive or to cover
every application or circumstance that may arise.
If you have any questions or need further
information or instructions, please contact
your local Eaton representative or visit
www.eaton.com.
