background image

23

22

Classe100 X16E

User and installation manual

N

P

M

Configuration

The device must be only physically configured.

N - Internal Unit number

 

The configurators connected to the N sockets of the device assign an identification number within 

the system to each video internal unit . The internal units must be configured in progressive order. 

Internal units with parallel connection (max 3 are allowed inside apartments without item 346850) 

must be configured using the same N configurator. In parallel with the main video internal unit, 

additional internal units, video internal units and/or ringtones may be installed.

P – Entrance Panel association

 

The configurators connected to the P sockets of the device identify the associated EP, which is the 

first Entrance Panel that switches itself on when the pushbutton is pressed the first time, as well as 

which door lock is activated when pressing the door lock pushbutton while the video internal unit 

is idle.

M – operating mode

 

The configurators connected to the M sockets of the device assign the operating modes to 

the 4 programmable keys ( ,  ,  ,  ) based on the indications of the 

Programming of the 

programmable keys

 table

They can also enable special functions that entail the activation of the professional studio 

and paging functions, individually or at the same time, in addition to the functions already 

programmed for the key.

SPECIAL FUNCTIONS

Key 

Internal 

intercom

Professional Studio 

(Office)

Paging

CONFIGUR

AT

OR M

0 0

2 0

4 0

8 0

Example

Summary of Contents for Classe100 X16E





































































































Reviews: