![background image](http://html1.mh-extra.com/html/bticino/classe100-x16e/classe100-x16e_user-and-installation-manual_2825384055.webp)
55
54
Classe100 X16E
User and installation manual
From stand-by,
press and hold down the joystick for 5 seconds
to access the advanced menu and
select the corresponding page.
From stand-by
press and hold down the joystick for 5 seconds
to access the advanced menu and
select the corresponding page.
ON
1
A
A Function status
notification (ON =
enabled, OFF = disabled)
1 Press the joystick to
change mode.
OFF
2
2
2 Move the joystick up/
down to select another
setting or the last page to
exit.
1
1 Press the joystick to
associate the first event.
01
0
2
2
A
B
2 Move the joystick up/
down to select the type of
call for which you want to
set the ringtone (see the
following table)
The page shows the type
of call (A) and the current
ringtone number (B).
This function enables/disables the BEEP when the keys are pressed. The function is disabled by
default, to enable it follow the procedure below:
This page can be used to modify the ringtones associated to the different types of call.
The ringtones played for calls from EP configured with S=2 and S=3 are set by default and cannot
be changed (check the Entrance Panel configuration with your installer).
Enable/disable the key sound
Associate a ringtone to an event (call)